Basic characteristics of imported high-temperature and high-pressure gas solenoid valve:
1, Safety factor: Unsafe prompts can cause disasters!
1. Corrosive substances: Plastic king gas solenoid valves and all stainless steel plates should be selected; The gas solenoid valve for imported water must use an isolation diaphragm type for strongly corrosive substances.
2. Flammable natural environment: It is necessary to choose products with relatively explosion-proof levels. For outdoor installations or places with high smoke and dust, moisture-proof and anti fouling types should be selected.
3. The nominal diameter of the gas solenoid valve should exceed the maximum pressure outside the pipe.
2, Acceptability: Not suitable for spending money and goods, but also adding to the burden!
3, Reliability: Unreliability will endanger all system software!
1. The service life during work is not included in the new factory setting experiment project, and the imported flange gas solenoid valve belongs to the new type inspection project. To ensure quality, a well-known trademark from a reliable manufacturer should be selected.
2. Work style: divided into three types: long-term work system, continuous short-term work system, and short-term work system. Our company's basic products are all long-term working systems, which means that the magnetic coil allows for long-term plug-in work.
3. Working voltage: When the posture frequency is specified high, imported pilot operated gas solenoid valves should be selected for construction, and switch power supplies should be selected for communication and exchange.
4. Reliability of posture.
