Gas valve is a device used to control the flow of gas, which is widely used in household, commercial, and industrial environments. The working principle of gas valves varies depending on their type and design, mainly including direct acting, pilot operated, and urban gas solenoid valves. The following are the working principles of several common gas valves:
1. Direct acting gas solenoid valve
The working principle of a direct acting gas solenoid valve is relatively simple. When the electromagnetic coil is powered on, the electromagnetic force lifts the seal off the valve seat and opens the valve; When the electromagnetic coil is powered off, the electromagnetic force disappears, the seal returns to its original position, and the valve closes.
2. Pilot operated gas solenoid valve
The working principle of a pilot operated gas solenoid valve is slightly more complex. When powered on, the pressure in the upper chamber rapidly decreases, forming a pressure difference between the upper and lower parts around the seal. The fluid pressure pushes the seal to move upward, and the valve opens; When the power is cut off, the spring force closes the pilot hole, and the inlet pressure rapidly increases through the bypass hole, forming a pressure difference between the lower and upper parts around the closed part of the valve. The fluid pressure pushes the closed part to move downward to close the valve.
3. Urban gas solenoid valve
When the electromagnetic head of the urban gas solenoid valve is energized under normal ventilation conditions, the valve stem will be locked by the electromagnetic head and the valve will be in the open state. When there is a leak in the gas pipeline or gas equipment, and the concentration of gas mixed with air reaches 25% of the lower explosive limit, the detector sends a signal to the controller, which emits sound and light alarms and turns on the exhaust fan. At the same time, the 220V electromagnetic head control voltage is cut off, and the electric magnet is driven to release the valve stem of the safety valve. The valve stem quickly falls under the action of the spring and its own weight, and the valve port closes to cut off the gas source. After power failure, the shut-off valve cannot be manually opened due to self-locking.
4. Leakage detection gas valve
Leak detection gas valve is a safety device specifically designed to detect and prevent gas leaks. It combines advanced sensing technology and valve control technology to quickly shut off gas supply when potential gas leaks are detected. Its working principle mainly includes four steps: gas monitoring, signal processing, decision-making and execution, and alarm and recording.
